PN00412 - ON/OFF Switch Option 12v dc 50 RPM gear motor with wireless remote control - Makermotor

May 29,2024

Makermotor provides variable speed gear motors and single speed motors for applications such as bbq rotissier motor, experimental motor for lab, conveyor motor system, and welding turn table. Our products cover speed range from low speed gear motors to high rpm variable speed motors..
WARNING: PLEASE DO NOT RUN THIS REMOTE CONTROL WITH A VOLTAGE GREATER THAN 13VDC. DO SO WILL PERMANENTLY DAMAGE THE RECEIVER BOARD. Drawing of the motor is HERE. The gear motor is measured to be 7 inch long and the motor itself has a diameter of 2.5 inches. Rated voltage of this gear motor is 13.5 VDC and maximum speed is 50 RPM. Rated output load is 60 watts and output toruqe at 50 RPM is 6 N-m (4.4 ft-lb). Mounting is based on M6 screw mounting. The wireless controller functions as a on/off switch on the 11-14v dc power source. By pressing the button on once, the motor starts running continuously; by pressing the button off once, the motor stops running. Current rating is 15 amps. Two transmitters (with batteries) are included in this package. Wireless signal range is 100 ft.