Sigely 09936 Pressure Cooker Sealing Ring/Gasket & Overpressure

June 02,2024

Brand: SigeIyFeatures: Remove the old sealing ring and the overpressure plug. To ensure safe operation and satisfactory performance from your pressure cooker, replace the overpressure plug every time you replacé the sealing ring (every two years is recómmended) or sooner if it becomes hard or inflexible. Clean the seal.

Brand: SigeIy

Features:

Remove the old sealing ring and the overpressure plug. To ensure safe operation and satisfactory performance from your pressure cooker, replace the overpressure plug every time you replacé the sealing ring (every two years is recómmended) or sooner if it becomes hard or inflexible.
Clean the sealing ring groove and overpressure plug hole thoroughly. Be sure they are free of all food particles and foreign material. A stiff brush or scouring pad can be used for cleaning the groove.
Wash the new sealing ring and overpressure plug in warm soapy water, rinse, and dry. Install the sealing ring by working it into the cover. Work it into the groove a small section at a time until it is fully in place. Be sure to fit it under the stop tab and the lock pin on the inside of the cover. If necessary, to help make the cover easier to open and close, a very light coating, of cooking oil may be applièd to the underside of the body lugs and sealing ring.
Install the overpressure plug by pushing the domed side of the plug, marked TOP, into the opening from the underside of the cover. The bottom edge of the overpressure plug shöuld be fully and evenly seated against the underside of the cover. When the overpressure plug is properly installed, the word TOP will be visible on the overpressure plug when viewing the outside of the cover.
To close, hold body handle with left hand and place. cover on with right hand. Move handles until cover drops into position. Put one and on the top center of the cover and push down firmly. Open and close the cover several times to make it operate more freely.

Details: 09936 Presto Sealing Ring & Overpressure Plug for 4 & 6 Qt Pressure Cookers. The sealing ring fits around the inside rim of the cover and forms a pressure-tight seal between the cover and the body of the pressure cooker during cooking. This pack contain both a sealing ring and overpressure plug It is recommended that both items be replaced at the same time. Compatible Models: for Presto Pressure Cooker models (0126002, 0135001-0135004, 0136001, 0136102, 0136304, 0136403, 01/PS6), aluminum (0126407, 0126408, 0126410), stainless steel (0136203, 0136206, 0136210) and electric stainless steel (0216001) Compatible Products: 01/PS4 - 4-Quart Pressure Cooker 01/PS6 - 6-Quart Stainless Steel Pressure Cooker 0126002 - 6-Quart Pressure Cooker 0126407 - 6-Quart Aluminum Pressure Cooker 0126408 - 6-Quart Aluminum Pressure Cooker 0126410 - 6-Quart Aluminum Pressure Cooker 0131001 - 4-Quart Stainless Steel Pressure Cooker 0131004 - 4-Quart Stainless Steel Pressure Cooker 0134001 - 4-Quart Stainless Steel Pressure Cooker 0134002 - 4-Quart Stainless Steel Pressure Cooker 0134103 - 4-Quart Stainless Steel Pressure Cooker 0134104 - 4-Quart Stainless Steel Pressure Cooker 0134105 - 4-Quart Stainless Steel Pressure Cooker 0134106 - 4-Quart Stainless Steel Pressure Cooker 0134108 - 4-Quart Stainless Steel Pressure Cooker 0135001 - 6-Quart Stainless Steel Pressure Cooker 0135004 - 6-Quart Stainless Steel Pressure Cooker 0136001 - 6-Quart Stainless Steel Pressure Cooker 0136102 - 6-Quart Stainless Steel Pressure Cooker 0136203 - 6-Quart Stainless Steel Pressure Cooker 0136206 - 6-Quart Stainless Steel Pressure Cooker 0136208 - 6-Quart Stainless Steel Pressure Cooker 0136210 - 6-Quart Stainless Steel Pressure Cooker 0136304 - 6-Quart Stainless Steel Pressure Cooker 0136403 - 6-Quart Stainless Steel Pressure Cooker

EAN: 0605883908155

Package Dimensions: 6.1 x 5.6 x 1.3 inches

Impresa Presto Pressure Cooker Replacement Gasket and Overpressure Plugs - 2 Sets - Rubber Sealing Rings - Fits Various 6-Quart Presto Models - Part 09936, 09904 and 50295 : Home & Kitchen

Sigely 09936 Pressure Cooker Sealing Ring/Gasket & Overpressure Plug (2 Sets per Pack)

LDEXIN 2 Pack Steam Release Valve, Steam Exhaust Safety Release Handle Replacement Part for Household Kitchen Electric Pressure Cooker

Remove the old sealing ring and the overpressure plug. To ensure safe operation and satisfactory performance from your pressure cooker, replace the

Sigely 09936 Pressure Cooker Sealing Ring/Gasket & Overpressure Plug (2 Sets per Pack) Compatible with Presto Various 6-Quart Models Replace 09936

Presto 09902 Pressure Cooker Sealing Ring with Air Vent and Safety Plug : Home & Kitchen

Food Grade Replacement Pressure Cooker Gasket & Sealing Ring

Pressure Cookers Gaskets for sale

Remove the old sealing ring and the overpressure plug. To ensure safe operation and satisfactory performance from your pressure cooker, replace the overpressure plug every time you replacé the sealing ring (every two years is recómmended) or sooner if it becomes hard or inflexible. Clean the sealing ring groove and overpressure plug hole thoroughly. Be sure they are free of all food particles and foreign material. A stiff brush or scouring pad can be used for cleaning the groove.

Sigely 09936 Pressure Cooker Sealing Ring/Gasket & Overpressure Plug (2 Sets per Pack)

09936 09904 Pressure Canner Sealing Ring and Overpressure Plug - Replacement for Presto pressure cooker models 0126002, 0135001-0135004,0136102, 0136001,0136403, 01/PS6 (2PCS) : Home & Kitchen

Impresa Presto Pressure Cooker Replacement Gasket and Overpressure Plugs - 2 Sets - Rubber Sealing Rings - Fits Various 6-Quart Presto Models - Part 09936, 09904 and 50295 : Home & Kitchen

Sealing Ring - 6 Quart Pressure Cooker — Yedi Houseware Appliances

LDEXIN 2 Pack Steam Release Valve, Steam Exhaust Safety Release Handle Replacement Part for Household Kitchen Electric Pressure Cooker