Submersible LED Lights Clearance, Waterproof Pool Lights Hot Tub
Submersible LED Lights Clearance, Waterproof Pool Lights Hot Tub
Arrives by Sun, Jan 28 Buy Submersible LED Lights Clearance, Waterproof Pool Lights Hot Tub Lights Battery Operated Underwater 8.5CM Lights 13 Colors Changing Led Lights for Aquarium Bathtub Camping Pool Party at .
Material: abs
Size: About 7cm/2.8in
Input voltage: 4.5 (V)
Packaging process: SMD
Number of LED lamp beads: 13 (pcs)
Luminous flux: 3 (lm)
Color temperature: 3500 (K)
Luminous efficiency of lamps: 85 (lm/w)
Power factor: change according to the number of lamps
Lighting angle: 720 (degrees)
Temperature rise: 3000 (K)
Color rendering index: 90
Protection class: IP68
Control method: IC control
Life: 50000 (H)
Power: 1.3 (W)
Package List:
1 x set of 13LED diving lights (1 light + 1 remote control) Notes:
Due to different displays and lighting effects, the actual color of the product may be slightly different from the color shown on the picture. Thanks!
Due to manual measurement, please allow slight measurement deviation.
Tips for LED Light：
1.Please make sure the sealing ring is undamaged, and properly stay in the groove.
2.Please twirl the light until it can not be twisted any further, to make it fully waterproof before putting underwater.( Very Important!!! otherwise it will leak)
3.Please dry the lights first before replacing batteries. Because the water outside lights may drop into lights and keep inside the battery case, it will damage the components, and overpower the lights.
4.For long time use, we recommend to use rechargeable battery to save batteries and money.
5.Because some rechargeable batteries are a bit big to insert into the battery case, so the contact is not connecting properly, the light will not light up. If the lights don't light up once you insert all 3 batteries, please move the battery to make them connect properly.
6.It’s better not use in hot water, because the vapour may go into the light, it will damage the components and lead to stop working.
7.If you don’t use for following long time, pleae remove batteries, it will help save power and protect led bulb.
Tips for RF Remote Control：
1.Please remove the plastic insulating film on the bottom of remote before using it.
2.Please long press the button ON on the remote for about 2 second to activate all the lights. After turning on, no need to long press, the light will be very sensitive to rejoin what you set.
3.For underwater using, please keep the remote within 10FT/3M-16.4FT/5M, because water will largely absorb signal, and weaken the signal to the lights.
4.Low Battery Checking: Press the button B, if it's no or very weak light, it means low battery, lease replace new batteries.Low power will weaken the sensitivity of remote.
5.Out of Power Checking: When the light stays in flashing red light, cannot control by other setting, it means it will be out of power soon, please replace new batteries.
6.Check the Remote Battery: When press the remote, you can see the red light on, if cannot see, it mean the remote is out of power, or it doesn't work, please remove the plastic film or replace new batteries.
Tips for Suction Cups：
1.Suction cup can be used in both air and underwater on flat and smooth surfaces. But not work on rough surface.
2.Please clean the surface before attaching, make sure there is not any stuff between the surface and suction cup, especially remember to remove the lubricant like shower cream, moss etc. ( very Important!!!)
3.Please pull the suction cups vertically if you want to remove them, don't pull it horizontally, it may pull out from the hole, there is the feature of design, it's not suction cup problem. Please note, and use it in correct way.
4.We already enlarged the suction cup to bigger size and tighter adsorptivity, it's competent to hold lights under 10-16.4ft/3-5m underwater.
Pool Lights, LED Pool Lights
Suction Cup Lights For Inground Pool
Submersible LED Lights Waterproof Pool Lights Hot Tub Lights Battery Operated
Underwater Inground Pool Lights
SANSI 01-08-001-156804 RGB Submersible LED Underwater Lights with Magnet and Suction Cups Waterproof IP68 with 16 Colors RF Remote 4-Pack
IP68 25W RGB Remote Surface Mounted Underwater LED Swimming Pool Light - China LED Pool Light, Underwater Lights
Material: abs, Size: About 7cm/2.8in, Input voltage: 4.5 (V), Packaging process: SMD, Number of LED lamp beads: 13 (pcs), Luminous flux: 3 (lm), Color
Submersible LED Lights Clearance, Waterproof Pool Lights Hot Tub Lights Battery Operated Underwater 8.5CM Lights 13 Colors Changing Led Lights for
Drop-in LED Pool lights for Above-ground pools?!?
Ziloco Submersible LED Lights Clearance, Waterproof Pool Lights Hot Tub Lights Battery Operated Underwater 8.5cm Lights 13 Colors Changing LED Lights for
SANSI 01-08-001-156804 RGB Submersible LED Underwater Lights with Magnet and Suction Cups Waterproof IP68 with 16 Colors RF Remote 4-Pack
Submersible LED Lights Clearance, Waterproof Pool Lights Hot Tub Lights Battery Operated Underwater 8.5CM Lights 13 Colors Changing Led Lights for Aquarium Bathtub Camping Pool Party
